Surgical operating room instruments are made of stainless steel. During management, a QR code will be engraved on the surface of the instrument to facilitate tracing whether the surgical instrument is lost during use. During the sterilization and disinfection process, the laser engraving code on the surface of the instrument can also be scanned. Document the disinfection process.

Due to the small size and high reflectivity of surgical instruments, the size of the QR code engraved on the top is relatively small, and there is a problem of reflection. The XT6201 industrial scanning gun produced by Xingtong IoT can scan well. The specific advantages of XT6201 are as follows:

1. Using 1280*960 CMOS, the megapixel camera can capture all kinds of barcodes very well.

2. In terms of algorithms, Xingtong has specially developed industrial decoding algorithms for various industrial applications, and has good decoding performance for code systems such as laser engraving and dot management.

3. In the scanning distance, it can detect the change of 40CM objects, and can decode and read within 100ms.

4. The appearance is designed with soft rubber coating, which can better resist shock and fall.

5. In terms of code scanning, he can quickly scan the laser engraving QR code on the surgical instrument, even if the volume is 2*2 ultra-small and high password, laser engraving code, laser inkjet code, laser engraving code, PCB board printing code, dot matrix Code, DM code, 3*3mm 2D datamatrix code, all kinds of small barcodes, coated reflective codes, etc. can be easily scanned.