Installing the module with embedded large scanning window in KIOSK requires a series of steps to ensure the correct installation and efficient operation of the module. Here is a basic installation guide:

Prepare Tools and Materials: 

• Embedded large scanning window module (make sure it is compatible with KIOSK).

• Screwdrivers, screws, nuts and other fasteners.

• Power and data cables.

• Necessary mounting brackets or brackets.

Determine the Installation Location: 

• Determine the best installation location for the large code scanning window module based on the KIOSK design and user usage habits.

• Ensure that the installation location does not block the user's view and is convenient for user operation.

• Install the bracket or fixed frame: If the KIOSK does not have a reserved position for the scanning window, you may need to install the bracket or fixed frame first.

• Use a screwdriver and fasteners to securely attach the bracket or mount to the KIOSK.

Install the Code Scanning Module: 

• Place the code scanning module on the bracket or fixed frame and fix it with screws or other fixings.

• Make sure the module is installed smoothly without shaking or tilting.

Connect the Power and Data Cable: 

• According to the module's instructions, connect the power cable to the module's power interface.

• Use a data cable to connect the module to the KIOSK host or other devices.

• Make sure the power cord and data cable are firmly connected and not loose or falling off.

Configuration and Testing: 

• Turn on the KIOSK host or other device, enter the system settings or scan the QR code module configuration interface.

• According to the module's instructions, perform necessary configurations on the module, such as setting the scanning mode, scanning speed, etc.

• Carry out a test scan to ensure that the module can correctly identify the barcode or QR code and transmit the data to the KIOSK host or other devices.

Adjustment and Optimization: 

• According to actual usage conditions, fine-tune the module’s installation position and angle to achieve the best scanning effect.

• If necessary, the configuration parameters of the module can be further optimized to improve scanning speed and accuracy.

Complete the Installation: 

• Check whether all connections are firm and ensure that the module installation is stable and reliable.

• Clean up the garbage and excess parts generated during the installation process.

• After completing the above steps, the embedded large code scanning window module should have been successfully installed on the KIOSK.

Regarding the integration method of the XT2601M code scanning module, it mainly involves key steps such as hardware connection, software configuration and test verification. The following is a detailed integration process:

Hardware Connection

• Confirm the interface: First, confirm the interface type between the XT2601M code scanning module and your self-service cash register or KIOSK. This may typically be USB, serial (such as RS232), or some other type of interface.

• Connect the cable: Use the appropriate cable to connect the QR code scanning module to your device. For example, if it is a USB interface, use a USB cable to connect.

• Fixed module: Firmly fix the XT2601M code scanning module at the designated position of the KIOSK, ensuring that the scanning window faces the user and there are no obstructions in the scanning area.

Software Configuration

• Install the driver: Download and install the driver for your operating system or device from the XT2601M supplier or official website. Make sure to install the driver correctly according to the installation guide.

• Device identification: Make sure your operating system or cashier software can correctly identify the XT2601M QR code scanning module. Check in Device Manager to see if any new devices are recognized.

• Configure scanning parameters: Configure the scanning mode, scanning speed, decoding type and other parameters of the scanning module according to your needs. This can usually be done in the device's settings menu or in the configuration options of your checkout software.

• Integrated interface: If your self-service cash register or KIOSK has a special API or SDK, you can use these interfaces to integrate the XT2601M QR code scanning module into the system. This enables automatic transmission and processing of scan code data.

Test Verification

• Functional test: Use different types of barcodes or QR codes to test the XT2601M code scanning module to ensure that it can accurately and quickly identify and decode.

• Integration test: Test the integration effect of the code scanning module and the self-service cash register or KIOSK. Ensure that scanned code data is correctly transmitted to the system and that the entire process is smooth.

• Exception handling: Test abnormal situations that may occur during the barcode scanning process, such as blurred, damaged or unrecognizable barcodes, to ensure that the system can properly handle these exceptions.

User Training and Deployment

• User training: Provide training on the use of the XT2601M code scanning module to personnel who operate self-service cash registers or KIOSKs to ensure that they are proficient in the operation methods.

• System deployment: Deploy the configured self-service cash register or KIOSK into actual usage scenarios for users to use.

Precautions

During the entire integration process, be sure to follow the instructions and operating specifications of the XT2601M QR code scanning module and your self-service cash register or KIOSK.

If you encounter problems or difficulties during the integration process, it is recommended to contact the supplier or technical support team of XT2601M for help in time.