In many manufacturing processes, one scanner will be selected for multiple computers, or one computer for multiple scanners. At this time, the selected wireless scanner will be connected to the host through 2.4G or RS232.

Many users will respond that they cannot use the gun after getting it. What is the reason for this? Let’s talk about it below:

1. Users who choose RS232, that is, the serial port, must use the serial port assistant to transfer data. If you directly open a text file, there is no way to transfer it.

2. After the scanner is connected to a computer, it does not transmit data and makes a beeping sound. There are two reasons that need to be eliminated in turn: 1. The pairing between the scanner and the receiver is messed up. For example, if you buy 10 scanners, There are 10 receivers, the A receiver was originally paired with the A gun, but the A receiver was plugged into the computer, but the gun used the B gun. At this time, the pairing is messed up, the data will not be transmitted and a beep will be sent. Didi's cry; 2. If you are using a scanner to point two computers, you need to turn on both computers so that the data will be transmitted. If only one computer is turned on, the data will not be transmitted.

If you have any questions, please leave a message.